UP Polytechnic Exam Date 2023 –
The UP Polytechnic Exam Date 2023 is scheduled from 02nd August, 2023 till 07th August 2023. Exams will be conducted in Offline Mode across thousands of exam centres in the State. Total 120 Questions will be asked in the exam in which each question carries 4 Marks. Negative Marking is applicable on wrong answers so make sure you attempt the paper carefully. After the exam is over, you should wait for the announcement of results and then admission will be offered to you.
Contents
What is the date of UP Polytechnic exam 2023?
The Joint Entrance Examination Council of Uttar Pradesh is going to conduct the UP Polytechnic Entrance Exam 2023 from 26th July to 1st August 2023. In this exam, lakhs of candidates have registered and now wish to download the JEECUP Admit Card 2023,
It is to inform you that the Hall Ticket for UP Polytechnic Entrance Exam will be out on 27 July 2023 and then you can appear in the exam as per JEECUP 2023 Exam Date, Till the Exam Date Comes, all of you should prepare well for the exam and then secure good marks in the exam to get qualified further.
We have given the direct link below by using which you can Download the UP Polytechnic Admit Card 2023 @ jeecup.admissions.nic.in and then appear in the examination. Various important details will be mentioned on the admit card such as exam centre location, exam date, timings and more.
After Downloading the JEECUP 2023 Hall Ticket, you should take a print out and verify the details mentioned on it. All the applicants should keep their UP Polytechnic Pravesh Patr 2023 with them after the exam to use it for the counselling purpose. As we know, Uttar Pradesh Polytechnic Entrance Exam is conducted every year to offer admissions in various Diploma Courses.
Many candidates have registered for the JEECUP 2023 Exam till 14th July and then started preparing for the exam. Now, it is to inform you that JEECUP Exam Date 2023 is announced and the paper is scheduled to be conducted from 26th July to 1st August. As per notice available on the official website, all the candidates will be able to check the JEECUP Admit Card 2023 on 27th July 2023.
You can visit the official website @ jeecup.admissions.nic.in and then use the application number to download the hall ticket. After Downloading the UP Polytechnic Admit Card 2023, you should verify the details mentioned on it and then attempt the paper with full preparation. We have mentioned the JEECUP 2023 Marking Scheme below using which you can prepare for the exam.
You should give maximum mock tests before the exam to secure good marks. The JEECUP 2023 Admit Card will be out soon on the official website jeecup.admissions.nic.in after which you can download it using the Registration Number. UP Polytechnic Admit Card
Sahara Refund Portal
ISRO Admit Card 2023
What is the last date of up polytechnic?
JEECUP 2023 Exam- Important Dates – The Exam Board has postponed the JEECUP Exam Date 2023 from 2nd to 7th August 2023 as mentioned on the official website. The Exam dates will be announced by the board and will be made available at www.jeecup.admissions.nic.in. All the JEECUP 2023 important dates have been updated in the table below for the convenience of the candidates.
| JEECUP 2023 Important Dates | |
| Events | Dates (Tentative) |
| JEECUP 2023 Notification | 4th March 2023 |
| JEECUP 2023 Application starting date | 6th March 2023 |
| JEECUP 2023 Application Form Last Date | 20th June 2023 |
| JEECUP 2023 Application Correction Window | 21st June to 27th June 2023 |
| JEECUP Admit Card 2023 Release Date | 27th July 2023 |
| JEECUP Exam Date 2023 | 2nd to 7th August 2023 |
| JEECUP 2023 Result | August 2023 |
| JEECUP 2023 Counselling | September 2023 |
What is the age limit for up polytechnic?
Criteria for Age: The age criteria for JEE Polytechnic exam is as follows: The age limit for JEE Polytechnic exam 2021 is none. As on July 1, 2021, the minimum age for JEE Polytechnic exam 2021 is 14 years old. There is no maximum age for JEE Polytechnic exam 2021.
Is UP Polytechnic exam online or offline?
UP Polytechnic Exam Date 2023 Out
| JEECUP Exam Date 2023 | |
|---|---|
| Exam | Joint Entrance Examination Council, Uttar Pradesh or JEECUP Exam 2023 |
| Mode of Application | Online |
| Mode of Exam | Offline for Group A, E1 & E2 Online for Group B to I & K1 to K8 |
| UP Polytechnic Admit Card 2023 | 27th July 2023 |
What is the qualification for UP Polytechnic?
UP JEE Polytechnic Educational Qualification – The exam is conducted for different groups. The eligibility for all the groups is as mentioned:
| Group | Courses | Minimum Eligibility |
| A | Engineering & Technology Diploma | 10th passed with a minimum of 35% marks. Candidates who appeared in the exam are also eligible. |
| B | Agriculture Engineering | 10th passed/ appeared (Agriculture) with minimum 35% marks or Agriculture Subject in class 12th |
| C | Fashion Design, Home science & Textile design engineering | 10th passed/ appeared with a minimum of 35% marks |
| D | Modern Office Management & Secretarial Practice | 12th passed/ appeared (Hindi and English subjects in 10th or 12th) |
| Library & Information Science | 12th passed/ appeared | |
| E1 (Bio) and E2 (Math) | Diploma in Pharmacy | Passed in 10+2 with Physic and Chemistry as compulsory subjects with Maths / Biology (Zoology and Botany) |
| F | Post Graduate Diploma in Biotechnology (Tissue culture) | B.Sc. passed/ appeared with Biology, Chemistry/Biochemistry |
| G | Post Graduate Diploma course | Graduate in any discipline (passed/ appeared) |
| H | Diploma in Hotel Management and Catering Technology | 12th passed/ appeared with 35% marks |
| I | Diploma in Aircraft Maintenance Engineering | 12th Science passed/ appeared and aggregate 50% marks in Physics, Chemistry and Mathematics subjects. |
| K1 to K8 | Lateral entry in 2nd Year of Engineering & Technology Diploma courses | Check out the table below |
Scroll left or right to view full table Through Lateral entry, candidates can get admission directly into the 2nd year of the Engineering diploma course. The general eligibility criteria are:
| Group | Courses | Minimum Eligibility |
| K1 | Civil Engineering, Civil Engineering (Environment & Pollution Control) | Painter(General) (Only class 10th passed candidate is eligible) COE (Construction and Wood Working), COE (Draftsman Civil) |
| K2 | Electrical Engineering, Electrical Engineering (Industrial Control), Electrical & Electronics Engineering | Electrician(Power Distribution) Electrician, Electroplater, WireMan (Only class 10th passed candidate is eligible), COE(Electric Sector) |
| K3 | Electronics Engineering, Electronics Engg. (Modern Consumer Electronics Appliances), Electronics Engg. (Micro Electronics), Electronics Engineering(Advance Microprocessor & Interface) | Mechanic Medical Electronics, Radiology Technician, Technician Power Electronics System, Electronic Mechanic, Mechanic Cum Operator Electronics Communication Systems, Mechanic Consumer Electronics Appliances OR Mechanic Consumer Electronics, Instrument Mechanic, Radio/ TV Mechanic, COE(Electronics Sector |
| K4 | Mechanical Engineering (Automobile), Mechanical Engineering (Computer Aided Design), Mechanical Engineering (Production), Mechanical Engineering (Refrigeration & Airconditioning), Mechanical Engineering (Maintenance) | Mechanic(Motor Vehicle), Mechanic (Refrigeration and Air Conditioning), Mechanic (Agriculture Machinery), Turner, Lift & Escalator Mechanic, COE (Production and Manufacturing Sector), COE (Automobile Sector), COE (Fabrication-Fitting and Welding Sector), COE (Refrigeration and Air Conditioning Sector), Tool and Die Maker (Die and Moulds), Mechanic (Machine Tool Maintenance), Machinist, Machinist (Grinder), Draftsman (Mechanical), Fitter, Tool and Die Maker (Press Tools, Jigs and Fixtures) |
| K5 | Information Technology, Computer Science and Engineering | Information Technology, Information Communication Technology and Electronics System Maintenance OR Information Technology and Electronics System Maintenance, COE (IT Sector) |
| K6 | Printing Technology | – |
| K7 | Fashion Design & Garment Technology | – |
| K8 | Textile Technology | Weaving Technician Textile Wet Processing Technician |
Please make sure that you meet the eligibility criteria before filling up the JEECUP 2022 application form.
How many seats are there in UP Polytechnic?
JEECUP Colleges – List of Polytechnic College in UP
| Name of the Polytechnic College in UP | Total Number of Seats |
|---|---|
| Lucknow Polytechnic, Lucknow | 60 |
| Hewett Polytechnic, Lucknow | 420 |
| Firoze Gandhi Polytechnic, Raibareli | 420 |
| Jawahar Lal Nehru Polytechnic, Mahmoodabad, Sitapur | 240 |
Is polytechnic diploma equivalent to 12th in Uttar Pradesh?
Yes, diploma is equivalent to 12th and a bit more than that. So there are no drawbacks. just that you spend a year more completing the diploma (10+3). If you are confused about careers after 12th/ diploma, there are a few ways to approach this. One, is to go for a career counsellor who would take parametric tests and identify your strengths and weaknesses and advise career categories to attempt.
What is the minimum qualification for UP polytechnic lecturer?
Educational Qualification –
| Educational Qualification for Various Posts of UPPSC Polytechnic Lecturer Recruitment | |
|---|---|
| Post Name | Educational Qualification |
| Principal | Ph.D. and First Class at either Bachelor’s or Master’s level in the relevant discipline (as enumerated in the list of AICTE approved Diploma Courses) with Minimum of 16 years of experience in teaching at degree or diploma level in technical education/Research/Industry, out of which at least 3 years shall be post Ph.D. experience and 5 years of experience not below the level of HOD. OR First Class at Bachelor’s or Master’s level in the relevant discipline (as enumerated in the list of AICTE approved Diploma Courses) and Minimum of 20 years of experience in teaching at degree or diploma level in technical education/Research/Industry, out of which 5 years of experience not below the level of HOD. |
| Lecturer, Engineering & Technical Branches | (Level-9A, Entry Pay 56,100/-) (a) Engineering/Technology: B.E./B.Tech./B.S.in relevant discipline (as enumerated in the list of AICTE approved Diploma Courses) with First Class.
|
| Lecturer (Non-Engineering) | (Level-9A, Entry Pay 56,100/-)
|
| Workshop Superintendent | Bachelor’s or Master’s degree in Mechanical Engineering with first class. |
| Librarian | Master’s Degree in Library Science with at least First Class or equivalent and a consistently good academic record, having the knowledge of computer.
|
Note: If a class/division is not awarded, a minimum of 60% marks in aggregate shall be considered equivalent to first class/division. If a Grade Point System is adopted, the CGPA will be converted into equivalent marks as below:
| Grade Point | Equivalent Percentage |
|---|---|
| 6.25 | 55% |
| 6.75 | 60% |
| 7.25 | 65% |
| 7.75 | 70% |
| 8.25 | 75% |
Given below are a few other related links for UPPSC Polytechnic Lecturer exam preparation:
What is the age for up teacher?
UP TGT Eligibility: Age Limit – The minimum age to be eligible for the UP TGT exam is 21 years. There is no upper age limit for UP TGT eligibility. Also Read:
How to become a lecturer in UP polytechnic?
Ans: The candidate must have a Master’s and PG degree in the relevant discipline with an aggregate of 60% marks in the specified subject from a recognized university by the Central Government.
How much is poly school fees?
Tuition Fees
| Admitted in Academic Year | Singaporeans | Permanent Residents |
|---|---|---|
| 2023 (more info below) | S$3,000 | S$6,200 |
| 2022 (more info below) | S$3,000 | S$6,200 |
| 2021 (more info below) | S$2,900 | S$6,000 |
| 2020 (more info below) | S$2,900 | S$6,000 |
What is the fees of UK polytechnic form?
For Payment of the Uttarakhand Polytechnic Application Form: –
The application fee for General and OBC students is 800 INR SC/ST students have to pay an amount of 500 INR The payment has to be done via online payment using Debit Card, Credit card, or Net Banking. Keep a print out of the payment receipt.
Which is the highest paid jobs in polytechnic?
What is the highest salary in Polytechnic? The highest-paying job at Polytechnic is a Lecturer with a salary of ₹2.7 Lakhs per year. The top 10% of employees earn more than ₹5.05 lakhs per year. The top 1% earn more than a whopping ₹9.84 lakhs per year.
How many questions are there in UP Polytechnic?
JEECUP 2023 Exam Pattern – JEECUP 2023 will be conducted for various groups (Group A to Group K). There will be one paper for each group of JEECUP. There will be different question paper for different examination for which the syllabus will also differ. Here, we are providing details regarding UP Polytechnic exam pattern 2023:
Number of Questions: The question paper will consist of total 100 questions. There will be separate questions for each group. It contains questions as per choice of courses. Question Paper Type: Only objective type questions will be asked in the examination for which four options will be provided and the candidates will be required to choose only one correct answer. Medium of Question Papers: All Examination papers will be printed in two columns, one in Hindi and other in English Medium. Subjects: It v aries Group to Group. Language: The question paper will be printed in English as well as in the Hindi Language. Mode of Exam: JEECUP will be conducted via online CBT mode (for all groups). Duration: The total time allotted to solve the question paper will be 150 minutes. Marking Scheme: For every correct answer, 4 marks will be awarded. Negative Marking: No marks will be deducted for incorrect answer as there is no negative marking. In case if the candidate chooses more than one response to the same question then, it will be considered as a wrong answer.
Is up BEd entrance exam online or offline?
UP B.Ed Exam Date 2023 Out : The Uttar Pradesh Joint Entrance Examination Bachelor of Education, UP BEd JEE is a state-level entrance examination which is conducted by the Uttar Pradesh government. UP B.Ed Exam date 2023 is announced by the Bundelkhand University, BU Jhansi which is organising Uttar Pradesh B.Ed Joint Entrance Exam 2023 this year on 15th June 2023.
What is the official website of UP Polytechnic Admit Card 2023?
Conclusion – The JEECUP Admit Card 2023 is a crucial document that every candidate must possess to appear for the UP Polytechnic exam. By following the simple steps mentioned above, you can easily download your admit card from the official website. Make sure to check all the details mentioned on the admit card for accuracy, and don’t forget to carry it to the exam hall along with a government-issued photo ID card and a clear ballpoint pen.
How many seats are there in UP Polytechnic?
JEECUP Colleges – List of Polytechnic College in UP
| Name of the Polytechnic College in UP | Total Number of Seats |
|---|---|
| Lucknow Polytechnic, Lucknow | 60 |
| Hewett Polytechnic, Lucknow | 420 |
| Firoze Gandhi Polytechnic, Raibareli | 420 |
| Jawahar Lal Nehru Polytechnic, Mahmoodabad, Sitapur | 240 |
How many questions are there in UP Polytechnic entrance exam?
JEECUP 2023 Exam Pattern – JEECUP 2023 will be conducted for various groups (Group A to Group K). There will be one paper for each group of JEECUP. There will be different question paper for different examination for which the syllabus will also differ. Here, we are providing details regarding UP Polytechnic exam pattern 2023:
Number of Questions: The question paper will consist of total 100 questions. There will be separate questions for each group. It contains questions as per choice of courses. Question Paper Type: Only objective type questions will be asked in the examination for which four options will be provided and the candidates will be required to choose only one correct answer. Medium of Question Papers: All Examination papers will be printed in two columns, one in Hindi and other in English Medium. Subjects: It v aries Group to Group. Language: The question paper will be printed in English as well as in the Hindi Language. Mode of Exam: JEECUP will be conducted via online CBT mode (for all groups). Duration: The total time allotted to solve the question paper will be 150 minutes. Marking Scheme: For every correct answer, 4 marks will be awarded. Negative Marking: No marks will be deducted for incorrect answer as there is no negative marking. In case if the candidate chooses more than one response to the same question then, it will be considered as a wrong answer.
